Property class, thread standard, surface finish, salt-spray hours and drive sizes for bolts, screws, pins and cased tool sets — enough for a workshop to check a part against the marking on its head without sending a request.
| Parameter | Value / basis |
|---|---|
| Types | Hex bolts · flange bolts · nuts · flat and spring washers |
| Standard | DIN · ISO · ASTM · GB, stated per reference |
| Thread size | M8 – M36 and imperial equivalents |
| Property class | 8.8 · 10.9 · 12.9 |
| Surface finish | Zinc plated · hot-dip galvanised · Dacromet · black oxide |
| Salt-spray hours | ≥240h · ≥720h · ≥1500h, stated per finish |
| Packing | Boxed per size; mixed boxes for container fill |
| MOQ | Trial from 1 pc / SKU |
| Parameter | Value / basis |
|---|---|
| Types | Self-drilling · deck · cup-head machine screw · self-tapping |
| Material | 304 (A2) stainless · carbon steel black epoxy |
| Thread | Coarse and fine, per reference; M1.7 – M6 and larger |
| Head | Countersunk ribbed · pan · cup head (hex socket) |
| Drive | Phillips · star (Torx-type) · hex socket |
| Point | Type-17 knife point · drill point |
| Application | Decking · cladding · panels · guards · timber |
| Packing | Boxed by size, mixed boxes for container fill |
| MOQ | Trial from 1 box |
| Parameter | Value / basis |
|---|---|
| Socket material | Chrome-vanadium (CR-V), stated on the set |
| Drive sizes | 1/4″ · 3/8″ · 1/2″, adapters between them |
| Socket range | 4 – 32 mm, deep and standard |
| Ratchet | 72-tooth, quick-release, 5° swing arc |
| Bits | S2 steel, 1/4″ hex, magnetic holder |
| Case | Blow-mould, marked positions, latch tested for transit |
| Customization | Printed case, logo, label and own reference codes |
| MOQ | Trial from 1 set |
| Parameter | Value / basis |
|---|---|
| Parts | Bucket pins · linkage pins · locking plates · clamps · chains · wire rope |
| Material | Carbon steel · alloy steel, stated per reference |
| Surface hardness | Stated per reference, batch record available |
| Surface finish | Plain · zinc plated · black oxide |
| Grade / breaking load | Stated per reference for chains and rope |
| Fitment basis | Machine model and part number, or drawing |
| MOQ | Trial from 1 pc / SKU |
Batch tensile, hardness and salt-spray reports are available per shipment, and tool lines are quoted by drive size, tooth count and material rather than by how many pieces are printed on the case.
| Parameter | What we record / supply |
|---|---|
| Standard | DIN · ISO · ASTM · GB, stated per reference |
| Thread size | M3 – M36, plus imperial and self-tapping sizes |
| Property class | 8.8 · 10.9 · 12.9 for bolts; 304 / A2 stainless for screws |
| Drive | Hex head · flange head · Phillips · star (Torx-type) · hex socket |
| Surface finish | Zinc plated · hot-dip galvanised · Dacromet · black oxide · black epoxy |
| Salt-spray hours | ≥240h · ≥720h · ≥1500h, stated per finish |
| Tool drive sizes | 1/4″ · 3/8″ · 1/2″, sockets 4 – 32 mm |
| Pins & clamps | Matched to bucket and quick-coupler references |
| Chains & wire rope | Grade and breaking load stated per reference |
| Private label | Box, label, case and artwork, minimum confirmed on the quotation |
| MOQ | Trial from 1 pc / SKU, packed to mixed boxes above stated volume |
Batch tensile, hardness and salt-spray reports are available per shipment, and tool lines are quoted by drive size, tooth count and material rather than by how many pieces are printed on the case.
Send the drawing or the standard you buy to today and we answer with the matching KINGARC reference.
| KINGARC SKU | OE Reference | Interchange Reference | Machine Application |
|---|---|---|---|
| SKU-HBxxxx | DIN 933 / 931 hex bolt | DIN / ISO interchange on request | Structural bolted joints on construction machinery |
| SKU-HSxxxx | 304 self-drilling screw | Interchange on request | Panel, guard and cladding fixing in wet or coastal service |
| SKU-HTxxxx | Deck screw, ribbed head | Interchange on request | Composite decking, timber and exterior cladding |
| SKU-HKxxxx | Socket set / tool set | Interchange on request | Workshop and field service kits, drive size stated |
Send the drawing or the standard you buy to today and we answer with the matching KINGARC reference.
One inquiry is enough. We read the list, check the references and reply with availability, MOQ and lead time.
