01
Consistent Quality
Every production batch is checked against the same approved drawing and first-article sample — material, hardness and dimensions — before release to packing.
Stable Quality · Custom Support · Reliable Commitment
KINGARC is a reliable B2B supplier of auto parts, excavator components and fasteners. Spark plugs, filters, brake pads, undercarriage and GET wear parts, seals and workshop tools — private label and custom packing, with fitment confirmed in writing before any quotation is issued.
From the first-article sample to the sealed container: quality held by inspection, custom work proved on a sample, dates written on the order, and anything we cannot hold said before the order.
Every production batch is checked against the same approved drawing and first-article sample — material, hardness and dimensions — before release to packing.
Private label, custom packing and made-to-drawing parts, confirmed on a physical sample before the run starts.
The shipping date is written on the order confirmation, and the closed container is photographed with its seal number before it leaves.
Fitment, quantity and lead time confirmed in writing. If we cannot hold a date, you hear it before the order — not after.
Spark plugs, service and brake parts, undercarriage and GET, seals and hydraulics, fasteners and hardware — what each part does, the machines it runs on, and the reference it is matched against.
Truck, car, motorcycle, construction machinery and industrial engines — iridium, platinum and nickel.
Oil, air, fuel, hydraulic and cabin filters, plus brake pads and linings — trucks, buses, cars and motorcycles.
Track rollers, idlers, sprockets, links, steel and rubber tracks, plus bucket teeth and GET wear parts.
Oil seals, O-rings, gaskets and hydraulic repair kits.
Bolts and nuts, 304 stainless screws, pins and clamps — plus cased socket and bit sets.
Thread and reach, filtration grade, WVA dimensions, surface hardness, seal material and fastener class — the numbers behind all five categories, each with the basis it is measured against.
Truck and bus, car and light commercial, motorcycle and scooter, construction machinery and genset — four different seats and heat ranges, run on one batch discipline.
Long-haul tractors, mixers, tippers and mining service trucks. Heat range is set for sustained load rather than cold starts, and the reference is confirmed against the engine serial or the n
Passenger cars, pick-ups, vans and light trucks. Two references — SK20HR11 and SK20R11 — carry full dimensions: thread, reach, hex, heat range and resistance, taken from the carton panel of
Small-engine seats, resistor types and short reaches. This is the segment where private label moves fastest, so carton artwork and reference coding are set up before the first production run
Excavator auxiliary engines, loader and dozer units, generator sets, gas engines and compressors. These run at fixed speed under continuous load, so heat range is chosen against duty rather
Thread and reach, filtration rating, WVA dimensions, surface hardness, seal material and temperature range — each with the basis it is measured against, so one number can be checked without reading a printed catalogue.
Thread, reach, hex, gap, resistance and heat range for all four application groups, with supply status per reference.
Filter media, ratings and seal profile; WVA29087 pad dimensions, friction and backing plate data.
Part groups, 58–62 HRC hardness, hardness depth, track pitch and shoe width.
Material, temperature, media and dimensions for oil seals, O-rings, gaskets and kits.
Property class, thread, finish, salt-spray hours and drive sizes for bolts, screws and tools.
Hardness, sealing, tensile and salt-spray reports per shipment, with packing list and invoice.
Stated as facts, not adjectives — every claim backed by a record we keep on file and can send you.
Programme buyers do not buy a catalogue page — they buy what goes on their own shelf. These six are standard for us, not exceptions.
Your brand on the carton, the box and the label, with artwork held on file for repeat runs.
Poly bag, blister, shrink, skin pack or bulk carton — stated per reference before the first run.
Send the drawing or the sample: dimensions, material, hardness and finish are quoted against it.
Your SKU codes printed and indexed next to ours, so your counter never cross-references by hand.
Buffer stock held against a scheduled release for distributors running monthly replenishment.
Spark plugs, filters, brake pads, undercarriage and hardware consolidated into one load, one set of documents.
Own-brand programmes, exclusive references per market, annual volume schedules and custom cartons.
Reference lists per vehicle or machine, consolidated shipments and documented batch records.
Counter-ready packs, mixed-SKU orders from one piece and fast repeat supply.
Made-to-drawing parts, sample approval before production and inspection before loading.
Send engine model or OE number. We confirm thread size, heat range and resistance before you order.
KINGARC is the brand owner. References are produced in vetted partner factories to the drawings, tolerances and inspection routine we set and audit, then released under our own name.
Private label, custom packing and made-to-drawing parts, with your reference printed next to ours.
In-stock items start from 1 pc per SKU. No strict bulk requirement for trial orders.
Sorting, packaging and dispatch within 24 hours after payment confirmation.
Send machine model, part number or dimension drawing. Fitment confirmed before quotation.
Grade 8.8 / 10.9 / 12.9, defined surface treatment and salt-spray hours, batch test reports available.
Written warranty policy available before order. Clear claim handling process.
One inquiry covers spark plugs, filters, brake pads, undercarriage parts, bucket teeth, seals and fasteners. Fitment is confirmed before we quote.
| Beneficiary Name | Lidaxin (Beijing) Technology Co., Ltd. |
|---|---|
| Account No. | 659305582 |
| Beneficiary Bank | China Minsheng Bank Guangzhou Shijing Sub-branch |
| Bank Address | Guangzhou, Guangdong, China |
| Corresponding Bank (SWIFT) | China Minsheng Bank, Guangzhou Branch |
| SWIFT CODE | MSBCCNBJ003 |
| Remarks | Payment for goods. |
A photograph of the old part, its number and the machine model is usually enough for us to confirm fitment the same working day.
One inquiry is enough. We read the list, check the references and reply with availability, MOQ and lead time.